Home Page
About Us    
Latest Articles
Varnish, shellac, polish or...

Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY
Downsizer Moderator

Joined: 28 Oct 2004
Posts: 25697
Location: Jumping on the bandwagon of opportunism
PostPosted: Tue Nov 24, 15 5:07 pm    Post subject: Varnish, shellac, polish or...  Reply with quote    

Is there an easy way to know what coating is on a piece of furniture? Most of the stuff we have is 2nd hand and it's not that obvious what coating it has which makes renovating it a bit tricky.

I've just touched up some fairly modern chairs with a satin varnish but it's too shiny whereas a light wax polish seems to be a better match. Is there a simple way of finding out before hand?


Joined: 02 Jul 2005
Posts: 35109
Location: yes
PostPosted: Tue Nov 24, 15 5:32 pm    Post subject: Reply with quote    

polish will come off with turpentine

shellac will come off or at least go sticky with meths

french polish needs both the above as it is a two stage process

varnish will come off with paint stripper or caustic soda or will flake if scraped

linseed oil needs stripper ,some oils will mostly come off with turpentine

if the item is well manky but fairly robust a good sanding is often the easy option (or even a fine set power plane for flat stuff )and then give it a surface of choice .

some stuff will have been varnished over a previous surface which confuses things a bit(see sand/plane)

what looks best or will wear best depends on the timber and the likely challenges the surface will meet

try to avoid oils over varnish and always avoid varnish over non drying oils

that is only a short list ,hope it helps a bit,wood finish is a huge subject

Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY All times are GMT
Page 1 of 1
View Latest Posts View Latest Posts


Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright 2004 marsjupiter.com