Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
What is it about Epson Cartridges?
Page Previous  1, 2, 3
 
Post new topic   Reply to topic    Downsizer Forum Index -> Reduce, Reuse, Recycle
Author 
 Message
mrsnesbitt



Joined: 28 Oct 2004
Posts: 1576

PostPosted: Wed Feb 23, 05 5:48 pm    Post subject: Reply with quote
    

Good old Martin eh!!!
Somebody had a plumbing query on RC! So I put them in Martin's direction! I am so thoughtful!

mrsnesbitt



Joined: 28 Oct 2004
Posts: 1576

PostPosted: Wed Feb 23, 05 11:07 pm    Post subject: Reply with quote
    

yep agree Tahir!
Am on the case NOW!

heronview
Guest





PostPosted: Wed Jun 29, 05 7:38 pm    Post subject: Epson C84 Problem Reply with quote
    

I had a Epson C64 and now a C84 and will never buy another Epson. These printers don't seem to last more than a year. When using the C84 a couple of cartridges ran out of ink and I replaced it. After replacing the colors that were empty, the replaced colors still did not print. I contacted Epson support and they told me to clean the heads, as if that wasn't one of the steps I tried before I contacted them. Then they told me to have it service. I have looked online and have seen many others with the same problem. It seem to me the C84 is a defective product that Epson will not own up to. So if you have to replace you printer stay away from Epson. The quailty of there design and hardware is very poor!

ButteryHOLsomeness



Joined: 03 Apr 2005
Posts: 770

PostPosted: Wed Jun 29, 05 9:01 pm    Post subject: Reply with quote
    

Sarah D wrote:
I have an Epson C62 Stylus - I bought it because I liked the shape. It's about two years old now, and has done sterling service for us - there's four of us using it constantly - committee work and papers, accounts, the childrens books and other writing, photos, knitting patterns, etc. Never had any major problem with it, and we use the compatible cartridges. If we used the Epson ones we would have to remortgage the house at the rate we use them.


i've a similar experience myself. we've had a 460 and a 640 stylus and we now have a cx3200 stylus all in one which is brilliant. i always use compatibles with no problems (sometimes you have to push them in a bit harder that's all)

the reason why epsons aren't used by the charities is because the charities refill them and sell them on or sell them to someone else that does this... you can't refill the epsons so they are of no use to them... i think because of this my next printer will be a cannon but i only just discovered this. for now i'm quite happy with my epson, they have always given me good service as well

and we use ours LOADS!!!

dougal



Joined: 15 Jan 2005
Posts: 7184
Location: South Kent
PostPosted: Wed Jun 29, 05 10:59 pm    Post subject: Reply with quote
    

Hi heronview -
(why not register and join in on other topics)
Epson make excellent printers, BUT - they will suffer from blocked nozzles, particularly if not routinely turned off, or not used much, or used with (at least some) "compatible" inks.

And with Epsons, the printhead (with the nozzles) is a permanent part of the printer, not a comsumable as with some printers.

The good news is that an ammonia based cleaner, such as Windowlene, can be used to flush out clogged nozzles. There are plenty of articles to be found on the web, (the american equivalent is called "Windex").

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Thu Jun 30, 05 5:57 am    Post subject: Reply with quote
    

Well after my Epson Photo 830 got through a whole colour cartridge in six months after only using it to print about 5 colour pages I doubt I'll buy another Epson. I need to find a printer where you can turn the colour setting off until needed as now I have to spend another £20 on a colour cartridge just to print with black ink only.

tawny owl



Joined: 29 Apr 2005
Posts: 563
Location: Hampshire
PostPosted: Thu Jun 30, 05 7:16 am    Post subject: Reply with quote
    

Sarah D wrote:
I have an Epson C62 Stylus - I bought it because I liked the shape. It's about two years old now, and has done sterling service for us - there's four of us using it constantly - committee work and papers, accounts, the childrens books and other writing, photos, knitting patterns, etc. Never had any major problem with it, and we use the compatible cartridges. If we used the Epson ones we would have to remortgage the house at the rate we use them.


Wouldn't it be better to have a laser printer instead (or in addition), if you're using it that much? Running costs for laser are about 2-3p, as opposed to the 18-35p of an inkjet, and they've come down a heck of a lot in price - Brother now do a basic laser printer for about 60 quid. You'd make that back in running costs in a few months.

sally_in_wales
Downsizer Moderator


Joined: 06 Mar 2005
Posts: 20809
Location: sunny wales
PostPosted: Thu Jun 30, 05 8:43 am    Post subject: Reply with quote
    

Mine is an Epson CX3200, one of the multi function jobbies. I have to say I really like it, ink is dirt cheap (compatibles) and apart from a couple of episodes of it feeding two pages at once at inconvenient moments (and that may havebeen the way the paper was loaded to be fair to it), its been just fine. I have to say cost of compatible ink is a big seller with me, so I doubt I'd ever buy a print head included cartridge machine

dougal



Joined: 15 Jan 2005
Posts: 7184
Location: South Kent
PostPosted: Thu Jun 30, 05 11:10 am    Post subject: Reply with quote
    

Treacodactyl wrote:
Well after my Epson Photo 830 got through a whole colour cartridge in six months after only using it to print about 5 colour pages I doubt I'll buy another Epson.
That will be pretty much *exactly* the same with ALL inkjets - *regardless* of the make.
The things get ready to print in colour when they start up, and must clear the nozzles at shutdown.
That is why you must *switch-off-at-the-printer* not just at the mains! It needs to "go to bed" properly!
Quote:
I need to find a printer where you can turn the colour setting off until needed as now I have to spend another £20 on a colour cartridge just to print with black ink only.

No such thing.
BUT look for Canons which have a *swappable* print unit. Such as the BJC3000. This can take *either* a big black-only cartridge with integral nozzles (BJ30?) or a colour printhead unit which takes smaller individual ink colour *tanks* (BJ31c etc?). There is a special (not tupperware) box to store the other unit so that it doesn't dry up too quickly.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Thu Jun 30, 05 12:02 pm    Post subject: Reply with quote
    

dougal wrote:
ALL inkjets - *regardless* of the make.
The things get ready to print in colour when they start up, and must clear the nozzles at shutdown.
That is why you must *switch-off-at-the-printer* not just at the mains! It needs to "go to bed" properly!


But that is exactly what I do and the printer only gets used a couple of times a month. I just don't need to print much which is a good thing and most printers can't cope with this?

I may consider getting another laser as the one I had a few years back lasted several years without having to do anything to it.

tawny owl



Joined: 29 Apr 2005
Posts: 563
Location: Hampshire
PostPosted: Fri Jul 01, 05 8:45 am    Post subject: Reply with quote
    

[quote="Treacodactyl"]
dougal wrote:
I may consider getting another laser as the one I had a few years back lasted several years without having to do anything to it.


I would definitely go for a laser every time, unless I really needed colour printing. You might even be able to get an old one from a local company - my last one was a freebie, and even came with a half-used toner cartridge that lasted me about a year.

dougal



Joined: 15 Jan 2005
Posts: 7184
Location: South Kent
PostPosted: Fri Jul 01, 05 12:23 pm    Post subject: Reply with quote
    

tawny owl wrote:
I would definitely go for a laser every time, unless I really needed colour printing. You might even be able to get an old one from a local company - my last one was a freebie, and even came with a half-used toner cartridge that lasted me about a year.

It may be worth noting that lasers use *lots* more electricity than inkjets (but still hardly a vast amount) and emit a bit of ozone.
Today's Times has an ad for a new HP laser, around the £70 mark. The "cartridge" should do 2,000 pages (standard text).

tawny owl



Joined: 29 Apr 2005
Posts: 563
Location: Hampshire
PostPosted: Fri Jul 01, 05 4:02 pm    Post subject: Reply with quote
    

dougal wrote:
It may be worth noting that lasers use *lots* more electricity than inkjets (but still hardly a vast amount) and emit a bit of ozone. Today's Times has an ad for a new HP laser, around the £70 mark. The "cartridge" should do 2,000 pages (standard text).


Agreed, but because the laser prints out so much faster, it works out at actually slightly less than the inkjet (assuming you switch it off when you're finished). A laser will print out between 8 and 25 pages/min, whereas an inkjet will probably still be chugging through the 3rd or 4th.

I use a Samsung, and the cartridge on that lasts for about 3000 pages, at about £55/cartridge. Well worth checking how many pages a cartridge will last for, and work out cost per page, and also, check if you need to replace a separate drum; most modern lasers incorporate the drum as part of the cartridge, but some don't and that can be another 200 quid every couple of years. IMO, the HP is a bit flimsy-looking, as is the Canon. Brother and Samsung seem to do much more substantial ones, and some of the lesser-known makes such as Oki and Kyocera are supposed to be good.

dougal



Joined: 15 Jan 2005
Posts: 7184
Location: South Kent
PostPosted: Fri Jul 01, 05 6:34 pm    Post subject: Reply with quote
    

tawny owl wrote:
.. but because the laser prints out so much faster, it works out at actually slightly less {electricity} than the inkjet (assuming you switch it off when you're finished). A laser will print out between 8 and 25 pages/min, whereas an inkjet will probably still be chugging through the 3rd or 4th.

Hmmm. Generalisation is never accurate. But because lasers *must* heat up their "fuser" roller to a temperature that risks setting fire to your paper if there's a jam, they do use a large amount of energy in preparing to print. (To prevent fires, the "paper jam" sensor shuts off the fuser heating.)
Its called a "fuser" because it melts the toner powder so that it sticks ("fuses") onto the paper.
Turning the printer off after each and every print job is not a realistic or sensible recommendation. The excessive thermal cycling is likely to cause problems such as premature failure of the fuser heater, never mind all the other electrical and electronic components.
Some machines, (I recall the original Canon colour office lasers), count the life of the drum in "turns". And startup costs more turns than printing a page! Exactly TD's inkjet problem!
"Pages/minute" specifications of lasers don't accurately represent real world performance. They just show the maximum paper transport speed. Even the slowest is fast enough for home use.
But lasers are generally much faster than inkets.
And usually have a higher "duty cycle" - a useful figure that indicates the maximum usage that the machine is designed for, eg 5,000 pages/month would be reasonable for an office laser, overkill for most homes. It indicates just how "heavy duty" the thing is supposed to be.


Quote:
I use a Samsung, and the cartridge on that lasts for about 3000 pages, at about £55/cartridge. Well worth checking how many pages a cartridge will last for, and work out cost per page, and also, check if you need to replace a separate drum; most modern lasers incorporate the drum as part of the cartridge, but some don't and that can be another 200 quid every couple of years.

I pointed out the cartidge capacity on that HP because its on the low side. (Many inkjets manage 1,000). 5,000 was normal for office lasers. Some (such the old HP 4mv - a magnificent beast) would give 10,000 A4's on a fill.
Cartridges with integral drum can often be refilled, as with inkjets.
Kyocera have long advocated a separate drum to reduce 'total cost of ownership' - but for very light duty such things are likely to prove uneconomic. And a machine with a £200 drum is going to cost way over £200 for the machine...
Quote:
IMO, the HP is a bit flimsy-looking,
The £79+vat HP 1020 has a duty cycle of 5,000 pages/month. The £105+vat HP 1022 is said to be good for 8,000 a month.
Heavyweight is not always heavy duty, as will be attested by anyone that ever lifted one of the original Canon CX engines (whether badged Canon, HP or Apple).

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Fri Jul 01, 05 9:02 pm    Post subject: Reply with quote
    

dougal wrote:
And startup costs more turns than printing a page! Exactly TD's inkjet problem!


Not quite as I would only turn the printer one about once a week. So, allowing for about 10 pages I printed and 26 weeks of 'startup ink' I still think the Epson either has some form of timer in the ink cartridge or wastes an unacceptibly large amount of ink to only allow 36 pages worth of printing.

I think the bigest problem with a laser printer is the ease of use so I'd end up printing far more than I need. But then there doesn't seem to e a design of cheap printer that's designed to last.

Post new topic   Reply to topic    Downsizer Forum Index -> Reduce, Reuse, Recycle All times are GMT
Page Previous  1, 2, 3
Page 3 of 3
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright © 2004 marsjupiter.com